Air Cooling Cooler:

1, stop and confirm that the pressure has been released, pull down the main power switch.

2, open the wind cover to clear the cover plate, or remove the cooling fan.

3, the use of compressed air back to blow the dirt, and then the dirt out of the wind hood, if more dirty, should be sprayed with some oil removal agent and then blow. When the above method can not be cleaned, the cooler needs to be removed, soaked or sprayed with cleaning liquid and with the help of brushes (no use of wire brushes) cleaning.

4. Install the cover plate or cooling fan.

Second, water-cooled air cooler "

1, stop and confirm that the pressure has been released, pull down the main power switch.

2. Disassemble the cooling water and inlet pipe.

3, the injection cleaning solution immersion or the pump circulation scouring (good recoil effect).

4. Rinse with water.

5. Install cooling water in and out of water pipe.